QuPSU P561

P/N: P561

Passive PoE Power Supply

PoE power supply for QuCam and QuPoE Switch SCA6E. It is dedicated to power through QuCam/QuPoE Switch:
1. 1x Teltonika RUT230/RUT240/RUT900/RUT950/RUT955
2. 4x CCTV cameras with active PoE 802.3af/at

- Passive PoE Power Supply
- Output: 56V, 1A
- Input: AC100-240V 0.8A Max 50/60Hz
- EU or UK power cord
- CE
- Caution: Indoor use only
Input voltage 110 … 240VAC
Input frequency 50 … 60Hz
Input current max. 2A RMS
Inrush current max. 30A
AC leakage current max. 3.5mA
Efficiency min. 80% @ 100VAC, 84% @ 240VAC
Dielectric strength (primary to secondary) 2kVAC/5mA/1s
Input socket IEC320-C6
AC power cord 1.5m length, 3 pins EU or UK plug
Output voltage 56VDC
Min. load 0A
Max. load 1A
Peak load 1.46A
Output power 56W
Line regulation ± 3%
Load regulation ± 5%
Ripple 560mVpp
Turn on delay time max. 5s
Rise time max. 40ms
Hold up time min. 5ms
Overshoot max. 15%
Protections Short circuit, over current (110 … 200% of DC output)
Ethernet ports Input (LAN): 1x RJ45 10/100Mbps
Output (PoE): 1x RJ45 10/100Mbps
PoE mode mode B: pins 4,5 + / pins 7,8 -
LEDs Green: Power supply is on, Orange: PoE device connected
MTBF 30,000 operating hours confidence-level at 80% load, 25°C
Operating temperature -10°C … +45°C
Storage temperature -20°C … +85°C
Humidity 5% @ 0°C, 90% @ 40°C
Size 146 x 59 x 30mm (LxWxH)
Safety CE: EMC/LVD / FCC Part 15 Class B/ EN55022 Class B/ EN55024