QuPSU P248E

P/N: P248E

Passive PoE Power Supply EU

PoE power supply dedicated to all QuSpot, QuMax and QuMini antennas with installed all Teltonika routers inside.

- Passive PoE Power Supply EU
- Output: 24V, 0.8A
- Input: AC100-240V 50/60Hz
- EU power cord
- Wall mount holder included
- CE, ATE, HIPOT
- Caution: Indoor use only
ELECTRICAL INPUT SPECIFICATION
Input voltage 110 … 240VAC
Input frequency 50 … 60Hz
Input current max. 2A RMS
Inrush current max. 30A
AC leakage current max. 3.5mA
Efficiency min. 80% @ 100VAC, 84% @ 240VAC
Dielectric strength (primary to secondary) 2kVAC/5mA/1s
Input socket IEC320-C6
AC power cord 0.75m length, 3 pins EU plug
ELECTRICAL OUTPUT SPECIFICATION
Output voltage 24VDC
Min. load 0A
Max. load 0.8A
Peak load 1.32A
Output power 19.2W
Line regulation ± 3%
Load regulation ± 5%
Ripple 240mVpp
Turn on delay time max. 5s
Rise time max. 40ms
Hold up time min. 5ms
Overshoot max. 15%
Protections Short circuit, over current (110 … 200% of DC output)
Ethernet ports Input (LAN): 1x RJ45 10/100Mbps
Output (PoE): 1x RJ45 10/100Mbps
PoE mode mode B: pins 4,5 + / pins 7,8 -
LEDs Green: Power supply is on, Blue: PoE device connected
OTHER
MTBF 30,000 operating hours confidence-level at 80% load, 25°C
Operating temperature -10°C … +45°C
Storage temperature -20°C … +85°C
Humidity 5% @ 0°C, 90% @ 40°C
Size 84 x 44 x 30mm (LxWxH)
Safety CE: EMC/LVD / FCC Part 15 Class B/ EN55022 Class B/ EN55024